CNC Equipment List

NL-2000SY/500 Lathe

• Maximum turning length – 510 mm (20.0 in.)
• X-axis travel – 260 mm (10.2 in.)
• Z-axis travel – 590 mm (23.2 in.)

• Y-axis travel – 100<+/-> mm (3.9<+/-2.0> in.)

• Maximum spindle speed – Headstock 2: 6,000 min.

NH4000 DCG Horizontal Machining Center

• X-axis travel (longitudinal movement of saddle) – 560 mm (22.0 in.)
• Y-axis travel (vertical movement of spindle head) – 560 mm (22.0 in.)
• Z-axis travel (cross movement of table) – 630 mm (24.8 in.)

• Maximum workpiece swing diameter – 630 mm (24.8 in.)
• Maximum workpiece height – 900 mm (35.4 in.)

• Maximum spindle speed – 14,000 min.

GT-20 CNC Lathe

• X axis offers 6" of travel with 2400 lb of thrust.
• Z axis offers 12" of travel with 3700 lb of thrust.
• 11" X 12" maximum capacity
• Rapids are 710 ipm in both axes

VF-3 Vertical Machining Center

• VMC has 40" x 20" x 25" xyz travel
• 40-taper cartridge spindle
• 30-hp
• 75 ft-lb of torque at a low 1400 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox - and will also run up to 10,000 rpm in 1.2 seconds for finishing aluminum

VF-3YT Vertical Machining Center

• VMC has 40" x 26" x 25" xyz travel
• All other specifications are same as VF-3

SL-30 Lathes

• 11.30" X 34" XZ travel
• Maximum turning capacity of 17" X 34"
• 10" chuck
• Bar capacity of up to 3.0"
• 30 HP
• Tool Presetter

TL-2 Lathe

• 8" X 48" XZ travel
• 16" maximum cutting diameter and 48" maximum cutting length
• 75 ipm in X axis rapids and 150 ipm in Z axis rapids

EC-2000 Horizontal Spindle

• 84" x 40" x 32" xyz travel
• 50-taper machining center
• 6000 rpm
• With a 2-speed geared head, the spindle is powered by a 30 hp vector drive system.
• Provides 450 ft-lb of torque for heavy cutting.
• Machine parts weighing up to 10,000 lbs

TM-1 Tool Room Mill

• 10 Station tool changer
• 30" X 12" X 12" XYZ travel